  INFO - FAQ - CC2-Forum - CCPro-Forum |
|
||
|
The continuation of the Avisaro memory card Unfortunately it is really broken I want to try it once more By ordering a new one And than program it with I2C According to the gentelmen of Avisaro is this better But I dont understand anything of the I2C Is there anyone who could help me to convert this program for the M-unit 2.0 Um den I2C Busmaster zu progrmmieren, kann folgender Code ggf. weiterhelfen: // Diese Funktion sendet Daten an das Avisaro-Modul // ------------------------------------------------ // Input: // device_address ---> I2C-Adresse des Avisaro-Moduls // *data ---> Zeigt auf den Anfang der zu versendenden Daten // size ---> Anzahl der Daten die zu versenden sind void I2C_Send (UINT8 device_address, UINT8 *data, int size) { // Setze START Bedingung I2C_start(); // Sende die Geräteadresse des Moduls I2C_out_byte (device_address<<1); // Warte Antwort ab I2C_wait_ack(); // Für alle Daten... while (size--) { // Sende ein Byte out_byte (*data); data++; // Warte Antwort ab I2C_wait_ack(); } // Fertig, setze STOP Bedingung I2C_stop(); } I only want data Tijd time Datum date Jaar Year AND 3 BYTE variabele Var1,Var2,Var3 I hope that some one can help me with this Thanks for the help > > Thank you very much > > I cant wait to try it out > but first i have to buy a new memory card > I keep you informed > > Hans > > > Hello again, > > I have changed the program, taking great care of where the “CARRIAGE RETURN” and “LINE FEED” are needed. > > I don’t understand the 1st answer from Avisaro but I think it has something to do with the + + +, I have also changed this in the program. > > Greetings, > > H.J. Windt > > > > '****************** SETUP ******************' > > pause 200 'Just a pause of 4sec.' > > put 0 'Needed because of a bug in the C-Control I v2.0 rs232' > > print"at+create test.txt" 'Create test.txt /with cr&lf' > > pause 150 'Pause 3sec.' > > pause 50 '*Subroutine must still be written for receiving OK or ERROR*' > > print"at+close" 'Close test.txt /with cr&lf' > > pause 50 '*Subroutine must still be written for receiving OK or ERROR*' > > '*******************************************' > > '***************** PROGRAM *****************' > > #start > > print"at+append test.txt" 'Open test.txt for appending data /with cr&lf' > > pause 50 '*Subroutine must still be written for receiving OK or ERROR*' > > print"at+datastream" 'Type of data is datastream /with cr&lf' > > pause 50 '*Subroutine must still be written for receiving OK or ERROR*' > > print"The quick brown fox jumps over the lazy dog." 'datastream /with cr&lf' > > print"The Avisaro Compact Flash Box is GREAT!" 'datastream /with cr&lf' > > print"Testend?"; 'Last datastream /NO cr&lf' > > pause 50 'Pause 1sec.' > > put&h2b '+ /NO cr&lf >> could also be print"+";??' > > pause 50 'Pause 1sec.' > > put&h2b '+ /NO cr&lf >> could also be print"+";??' > > pause 50 'Pause 1sec.' > > put&h2b '+ /NO cr&lf >> could also be print"+";??' > > pause 50 '*Subroutine must still be written for receiving OK or ERROR*' > > #end_loop > > beep 4,2,4: beep 4,2,4 > > goto end_loop > > '*******************************************' > |
| Antwort schreiben |
Re: CF card van Avisaro (von Windt H.J. - 27.11.2005 16:05)Re: CF card van Avisaro (von Hans - 27.11.2005 19:00)Re: CF card van Avisaro (von Windt H.J. - 30.11.2005 15:32)Re: CF card van Avisaro (von Windt H.J. - 30.11.2005 21:58)Re: CF card van Avisaro (von Hans - 30.11.2005 22:35)